ExcelPTZ PTZ605 series Manual de instrucciones descargar pdf (Pagina 25)

Setting the Patrol (Tour)

To setup the patrol/tour you need to enter the Advanced Menu System by selecting

<CALL> 95 <Enter>on the keypad or <CALL> 64 <Enter>. (Call varies according module type)

You will see the Main Menu displayed on the screen.

Enter the password to enter the menu. The Default is 111111. See Advance Setup menu to change.

Using the joystick up/down direction movement, select the MOTION SETUP menu.

Use the joystick pan right movement to enter this menu.

Now use the Joystick up/down direction movement to select PATROLS. To the right of this, is the

patrol sequence number. By moving the Joystick to the right this number can be increased from 01

to 06 (up to six patrols/tours can be programmed) or decreased using the left direction movement.

Start with sequence 01.

Now select EDIT PATROL and press the OPEN button to select edit mode. A table will be

displayed showing 16 patrol item numbers. Note that the screen is divided into two halves with two

patrol positions per line. Only the odd patrol item numbers are identified down the left hand side of

the display. In the bottom left hand corner the patrol sequence number is displayed. This can be 01

~ 06.

In the example we are setting four presets in the first patrol sequence.

To edit a patrol sequence

NO Patrol Item No.

POS No. of Preset Position

TM Dwell time at this position

Time 0 ~ 99 seconds

SEQ:nn The Patrol number. (01 ~ 06)

Special Note: The patrol item number (NO) is an ascending number list of the preset items within

this sequence. It may not necessarily reflect the actual preset number. You could for instance have

preset item (NO) 01 with preset position 004 as the first preset required.

Enter the preset position number (POS) and the dwell time (TM) for each preset by using the

Joystick up/down movement. Move the Joystick to the right to move to the next field.

After including all the presets required in this patrol/tour, press the Keypad CLOSE button to exit.

If you add extra presets later and wish to incorporate into a patrol/tour already created, you must

add the additional preset positions in the necessary EDIT PATROL table sequence.

NO POS TM NO POS TM

01 001 01 02 002 01

03 003 01 04 004 01

05 --- -- -- --- --

07 --- -- -- --- --

09 --- -- -- --- --

11 --- -- -- --- --

13 --- -- -- --- --

15 --- -- -- --- --

PATROL:01 CLOSE:EXIT

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 57 58

Sin comentarios

ExcelPTZ PTZ605 series Manual de instrucciones Pagina 25