ExcelPTZ PTZ605 series Manual de instrucciones descargar pdf (Pagina 4)

Description of Functions

This intelligent dome camera is a hi-tech CCTV product, which incorporates a high-clarity colour

camera. It has a panoramic variable speed PAN/TILT movement, a multifunctional decoder, a

character generator and an on-board processor for logic handling. The dome is easy to connect,

install, maintain and operate, and has many features. The dome is compact and has a strong

structure with a modern and appealing appearance.

1. Integrated Multi-Protocol Decoder

a. The integrated multifunctional decoder can communicate with 16 different protocols. The

baud rate can be independently set allowing compatibility with numerous systems with

selectable baud rates from 2400 bps to 19200 bps. Dip switches control the selection of the

protocol and baud rate thus making this dome camera easy to set up and use.

b. This dome uses RS485 serial control and can address from 1 to 1023 cameras using binary

addresses.

2. Integrated Speed-Variable PAN/TILT

a. The dome can turn 360º horizontally and continuously with unlimited positions with an

adjustable speed from 0.2 - 300rad/s and turning 0 - 90º vertically with a speed up to 120

rad/s.

b. The dome can run at low speed, low noise, and does not show any picture shake.

c. The dome has an automatic 180º flip facility and provides panoramic monitoring without

any blind spots.

d. This dome is a high precision unit and maintains preset positions up to ±0.1°.

3. High Intelligent Settings

a This dome can store up to 128 preset positions in non-volatile memory that are not lost

with a power failure. Refer to the section “Presets and other functions.”

b The dome can scan horizontally between two points

and the scan speed can be modified.

The dome can scan a range larger or smaller than 180° between any two points with

adjustable speed settings. Refer to the section on “Auto Scan.”

c Six sets of tours (patrols) each with 16 preset positions can be programmed. The running

speed and the dwell times are adjustable. Refer to the section on “Patrols (Tours).”

d. The dome camera can simulate a route operated by you within a 120 second interval by

utilising the Record Pattern facility. Refer to the section on “Record Pattern.”

e. Proportional pan function. The dome travel speed will depend upon the extent of the zoom

coverage. In telephoto zoom mode, the pan and tilt speeds will be slower for a given

amount of joystick movement than that in wide zoom mode. This keeps the image from

moving too fast on the monitor when there is a large amount of zoom coverage. This

slowing down does not occur when going to a preset, but does occur in turbo mode when

the high speed zoom is selected. The minimum pan and tilt speeds are 0.1 degree per

second at full zoom.

f. Password Function

. Allows access to the menu to be password protected. Default = 111111

g. Angle Display

. Three options for displaying camera angle settings.

h. Software Modify the Dome Address. Allows dome address to be changed through RS485

software (SID).

i. Image Effect & Zero Iluminance. Will display when set in B&W mode or manual zero

illuminance.

j. Angle Display The dome can display panning, tilt and view angles of the camera.

KEY FUNCTIONS

1 2 3 4 5 6 7 8 9 ... 57 58

Comentarios a estos manuales

Sin comentarios

ExcelPTZ PTZ605 series Manual de instrucciones Pagina 4

Comentarios a estos manuales